 |
 |
 |
|
|
Fast
Simple
Durable
Accurate |
| |
|
|
|
|
Simple to use
and accurate |
|
FVC, VC with breathing pattern plus MVV tests with real time curves.
Over 30 parameters with automatic interpretation and test quality control.
PRE/POST bronchial response protocol with F/V loop comparison.
Memory for 1500 tests.
External printer direct connection. |
| |
|
|
|
|
| Two different flowmeters available |
|
 FlowMir disposable turbine for single patient use
 High accuracy.
Easy to replace.
Very low cost.
Designed for use with MIR spirometers.
FlowMIR is factory calibrated.
Available in box of 100 pieces.
No maintenance – No filter – No problem.
Hygiene 100% guaranteed by single packaging.
|
|
MIR digital reusable and disposable turbines
are developed in full compliance with ATS standards
and guarantee accuracy in all environmental conditions |
 |
|
Reusable turbine
for long term operation
High accuracy
Long term stability
Easy to clean or sterilize |
|
| |
|
|
|
|
| Precise measurement |
|
The proven MIR turbine flow sensor requires no calibration and complies with the severe ATS 24/26 waveforms.
|
|
(Tested at LDS Hospital, Salt Lake City - Utah) |
| |
|
|
|
|
| Portable spirometry |
|
Only 1.9 kg for truly portable spirometry. Rechargeable battery plus mains power. Internal temperature sensor for automatic BTPS conversion.
Upgradeable internal software by connecting to the PC. |
|
 |
| |
|
|
|
|
| Fast Printout |
|
Silent thermal printer full with spirometric report prints in seconds (112 mm width). |
|
 |
| |
|
|
|
|
| Keyboard |
|
User-friendly keyboard with dedicated function keys plus alphanumeric data entry. |
|
|
| |
|
|
|
|
| PC connection |
|
WinspiroPro software turns the Spirolab II into an on-line clinical spirometer with the Flow/Volume curve shown in real time on PC.
PRE-POST bronchial challenge test.
FEV1 dose-response curves.
Lung Age estimation.
|
|
 |
| |
|
|
|
|
Technical
specifications |
|
| Power supply: |
Rechargeable battery and mains power |
| Temperature sensor: |
Semiconductor 0-45° C |
| Flow/volume transducer: |
digital turbine |
| Flow/volume range: |
± 16 Ls-1 / 10 L, BTPS |
| Volume accuracy: |
± 3% or 50 mL |
| Flow accuracy: |
± 5% or 200 mL/s |
| Dynamic resistance: |
<0.8 cm H2O/L/s |
| Colour display: |
FSTN 240x320 |
| Printer/paper: |
Thermal, 112 mm width |
| Mouthpieces: |
30 mm external diameter |
| Serial output: |
RS 232, optoisolated |
| Dimensions: |
310 x 205 x 65 mm |
| Weight: |
1,9 Kg circa |
| Parameters: |
FVC, FEV1, FEV1%, FEV6, FEV6%, FEV1/FEV6%, PEF, FEF25-75%, FEF25%, FEF50%, FEF75%, FET, Vext, *FVC, *FEV1, *PEF, PIF, FIVC, FIV1, FIV1%, VC, IVC, ERV, IC, VT, VE, BF, Ti, Te, Ti/Ttot, VT/Ti, MVV |
| Carryng-case: |
included |
|
|
Mir spirometers
are tested with PWG (Pulmonary Waveform Generator) by running the 24/26 ATS standard curves. |
| |
|
|
|
|
Quality
spirometry |
|
 |
FDA |
ATS |
ISO |
ISO |
| 0476 |
Approved |
Certified |
9001-2000 |
13485 |
|
|
|
